Advertisement
TrekStep™ – Installation Instructions
Parts List and Hardware Identifi cation
Linkage Assembly,
Part Number 476.01,
Qty - 1
M8-1.25 U-Nut,
Part Number
460.98, Qty - 1
Side Bracket, Part
Number 508.00,
Qty - 1
.5ml Tube Red
Loctite, Qty - 1, Part
Number 309.83
Number
1/4" Spacer, Part
Number 487.64,
Qty - 2
M10-1.5 x 65 Partial Thread
Hex Head Screw, Part Number
476.02, Qty - 2
Rev. B 0223
Running Board Assembly,
Part Number 514.10, Qty - 1
Mounting Bracket, Part
Number 476.07, Qty - 1
M10 Lock Washer,
M6-1.0 x 18 Socket
Part Number 481.59
Cap Screw, Part
Qty - 2
Number 588.03, Qty - 3
M10-1.5 x 45mm Partial Thread Hex Head
Screw, Part Number 487.20, Qty - 2
Apply 2 drops of loctite to each fastener before installtion.
2014 – Current Models Only
Remove Small Support Bracket
Locate the small support bracket on drivers side of vehicle. Use an M12
socket or wrench to remove the bolts from support bracket. Remove the
bracket from the vehicle.
2014 – Current Models Only
Remove Large Bumper Support Bracket
Locate the large bumper support bracket on drivers side. Use an M13 wrench
or socket to remove the 3 bolts that attach bracket to the frame and bumper.
2013 or earlier skip to Step 7
Remove M8
Bolts
Remove
M13 Bolts
75505 pg. 2
Advertisement
