Download Print this page
Bestop 53819 Installation Instructions Manual

Bestop 53819 Installation Instructions Manual

Halftopfor jeep wrangler tj 1997; jeep wrangler tj 1998; jeep wrangler tj 1999; jeep wrangler tj 2000; jeep wrangler tj 2001; jeep wrangler tj 2002 with factory hard top

Advertisement

Quick Links

Installation Instructions

Halftop
www.Bestop.com
- We're here to help! Visit our web site and click on
INSTALLATION TIME
1 1/2 Hour
TOOLS
1/8" Bit
US Patent D474,145
SKILL LEVEL
2 - Moderately Easy
In order to prevent sagging, pooling and leakage, remove snow and water from the rear
portion of the Halftop, when applicable.
Vehicle Application:
• Jeep Wrangler TJ with Factory Hard Top
1997 – 2002
Part Number: 53819
"Ask a
Question". Click here for more
Jeep Accessories by Bestop.

Advertisement

loading

Summary of Contents for Bestop 53819

  • Page 1: Installation Instructions

    Vehicle Application: Installation Instructions • Jeep Wrangler TJ with Factory Hard Top Halftop 1997 – 2002 Part Number: 53819 US Patent D474,145 www.Bestop.com - We’re here to help! Visit our web site and click on “Ask a Question”. Click here for more Jeep Accessories by Bestop.
  • Page 2 Part Number 236.20, Qty - 2 Tailgate Retainer Mount, Left, Tailgate Retainer Mount, Right, Qty - 1, Part Number 311.86 Qty - 1, Part Number 311.85 Tailgate Bar, Qty - 1, Part Number 288.75 Rev. B 0912 53819 pg. 2...
  • Page 3 #8 x 1" Pan “Z” Loctite to the threads) Head Screw 29 1/2" “Z” Channel and #10 Star Washers Door Channel Riser Surround Rear Front Floor Riser Front Door Surround Bracket Front Floor Riser Rev. B 0912 53819 pg. 3...
  • Page 4 Door Surround if necessary for a good seal. 5/16-18 Tapping Knob Plate - under ledge Horizontal Driver's Side Shown Support Bar Detail of Knobs Thread Knob Door Surround into Bracket Bracket - Front or Rear Rev. B 0912 53819 pg. 4...
  • Page 5 1/8" hole at Tailgate Washer Screw Opening the marked locations. Install the mounts with #8 x 1/2" Pan Head two #8 x 1/2" Pan Head Washer Screws for Washer Screws each mount. Windshield Header Mounting Bracket Rev. B 0912 53819 pg. 5...
  • Page 6 Footman Loop on the windshield frame and then loosely back through the buckle on the strap. DO NOT tighten the strap at this time. Thread Loosely Buckle through Buckle Strap Threading Strap through Buckle Rev. B 0912 53819 pg. 6...
  • Page 7 Halftop into the groove Mount in the Tailgate Retainer Tube on inside of Rear Curtain Roll Plastic Strip into Fabric Side Retainer Tailgate Retainer Plastic Strip Mount Tailgate Bar - Oriented with Rubber Bulb Down Plastic Strip Rev. B 0912 53819 pg. 7...
  • Page 8 Halftop Rear Section and the Fasten Hook Tailgate Retainer Mounts. and Loop Strips Sport Bar Sport Plastic Strips Rear Corner Retainer Fabric Fasten Hook and Loop Strips Plastic Strip Detail of Plastic Strip Rev. B 0912 53819 pg. 8...
  • Page 9 Rotate the front of the header toward the rear of the vehicle. Fold Front of Deck Back Release Windshield Header Latches Pull Down and Out on Loop to Release Plastic Strip Rev. B 0912 53819 pg. 9...
  • Page 10 Windshield Header Deck Fabric Assembly Catch Rolled To Start Zipper - Sliders Fabric in J-Clip Hook and Roll Fabric must be together Strap Loop inside vehicle J-Clip Strap Sport Tuck Fabric in above doors Rev. B 0912 53819 pg. 10...
  • Page 11: Limited Warranty

    Care and Maintenance of your Bestop Product Your Bestop product is made of the fi nest materials available. To keep it looking new and for the maximum possible wear, it will need periodic cleaning and maintenance. Fabric: The fabric should be washed often using soap, warm water and a soft bristle brush. Rinse with clear water to remove all traces of soap or use Bestop-recommended Bestop Cleaner and Bestop Protectant.