Product Installation; Lux Chart - Event Lighting PAR4X12B2 User Manual

Warning

Do not open this device, there are no user serviceable parts inside. Risk of electric shock.

Do not look directly at the light source from close range.

Avoid contact with the unit during operation, as the housing may become hot. Allow the fixture to
cool for at least 15 minutes after turning off before touching.

Install this device in a location with adequate ventilation, at least 50cm from adjacent surfaces.

Do not operate this device, or connect this device to power, within 50cm of any flammable
material.

Use a safety chain when mounting this device overhead.

Do not operate this device outdoors where excessive dust, heat, water, or humidity may affect it.

This fixture was designed for indoor use only, do not expose this unit to rain or use nearwater..

Do not operate this device if the housing, lenses, or cables appear damaged.

Do not connect this device to a dimmer or rheostat.

Do not operate this device at temperatures higher than 40°C (104°F).

Only connect this device to a grounded and protected circuit.

Only use the hanging bracket to carry this device.

Stop using this device immediately if a serious operating problem becomes apparent.

Product Installation

PAR4X12B2 can be mounted in many orientations, provided each individual device is secured by
the use of the correct mounting bracket. Use a safety chain when mounting PAR9X120B overhead

Lux Chart

Distance (m)
Diameter (m)
Red
Green
Blue
White
Amber
UV
Full
www.event-lighting.com.au
1 2
0 0.44 0 0.89
883 263
1356 389
1610 450
1722 513
532 151
492 156
5980 1590
3 4
01.33 01.77
116 73
171 106
202 122
224 138
72 46
72 46
732 440
2
5
0 2.22
52
73
83
94
36
35
292