Table of Contents
Advertisement
Danfoss ECtemp Touch
IP class
Protection class
Dimensions
Weight
Electrical safety and Electro-Magnetic Compatibility for
this product is covered by the compliance with the EN/IEC
Standard "Automatic electrical controls for household and
similar use":
• EN/IEC 60730-1 (general)
• EN/IEC 60730-2-9 (thermostat)
1.2
Safety Instructions
Make sure the mains supply to the thermostat is turned off
before installation.
Important: When the thermostat is used to control a floor
heating element in connection with a wooden floor or
similar material, always use a floor sensor and never set the
maximum floor temperature to more than 35°C.
Please also note the following:
• The installation of the thermostat must be done by an
authorized and qualified installer according to local
regulations.
Installation Guide
21
Class II -
85 x 85 x 20-24 mm
(in-wall depth: 22 mm)
103 g
5
Advertisement
Table of Contents
