Safety Instructions - Danfoss 140F1080 Installation Manual

DEVIreg™ 610
Dimensions
Weight
The product complies with the EN/IEC Standard "Automatic
electrical controls for household and similar use":
• EN/IEC 60730-1 (general)
• EN/IEC 60730-2-9 (thermostat)
1.2

Safety Instructions

Make sure the mains supply to the thermostat is turned off
before installation.
Please also note the following:
• The installation of the thermostat must be done by an
authorized and qualified installer according to local
regulations.
• The thermostat must be connected to a power supply
via an all-pole disconnection switch.
• The sensor is to be considered as live voltage. Have
this in mind if the sensor must be extended.
• Always connect the thermostat to continuous power
supply.
• Do not expose the thermostat to moisture, water,
dust, and excessive heat.
Installation Guide
100 x 69,5 x 45 mm
165 g
5