Safety Instructions - Danfoss DEVI Smart Installation Manual

IP class
Protection class
Dimensions
Weight
* not relevant for switch function
Electrical safety and Electro-Magnetic Compatibility for this
product is covered by the compliance with the EN/IEC Standard
"Automatic electrical controls for household and similar use":
• EN/IEC 60730-1 (general)
• EN/IEC 60730-2-7 (timer)
• EN/IEC 60730-2-9 (thermostat)
3

Safety Instructions

Make sure the mains supply to the thermostat/switch is
turned o before installation.
Important: When the thermostat is used to control a
oor heating element in connection with a wooden oor
or similar material, always use a oor sensor and never set
the maximum oor temperature to more than 35 °C.
Please also note the following:
6
21
Class II -
85 x 85 x 20-24 mm
(in-wall depth: 22 mm)
127 g
DEVIreg™ Smart
Installation Guide