Download Print this page

Safety Instructions - Danfoss DEVIreg 532 Installation Manual

Electronic thermostat

Advertisement

DEVIreg™ 532
Type
Storage temperature
IP class
Protection class
Dimensions
Weight
The product complies with the EN/IEC Standard «Automatic
electrical controls for household and similar use»:
• EN/IEC 60730-1 (general)
• EN/IEC 60730-2-9 (thermostat)
1.2

Safety Instructions

Make sure the mains supply to the thermostat is turned off
before installation.
IMPORTANT: When the thermostat is used to control a
floor heating element in connection with a wooden floor or
similar material, always use a floor sensor and never set the
maximum floor temperature to more than 35°C.
Please also note the following:
The installation of the thermostat must be done by an
authorized and qualified installer according to local
regulations.
Installation Guide
1C
-20 to +65°C
31
Class II -
85 x 85 x 36 mm
90 g
5

Advertisement

loading