Forecast - Danfoss ECtemp Touch Installation Manual

Danfoss ECtemp Touch
12. Use the < and > arrows to
select whether the timer
should be activated or not.
Press
the initial thermostat setup.
Skip Step 13.
13. Enter your web-generated
code. Then press
the initial thermostat setup.
If no check mark (
appears, the hexacode is
incorrect.
3.2

Forecast

The forecast feature is used when you switch between
economy temperature and comfort temperature. If forecast
is turned on, heating will start so that the requested tem-
perature is reached at the specified time.
For example, if your comfort temperature is set to 22°C and
the comfort period starts at 6.00 o'clock am, heating will
start before 6 o'clock so that your room temperature will be
22°C at 6 o'clock. If forecast is turned off, heating will not
start until 6 o'clock and it will take a while to reach a room
temperature of 22°C.
The forecast feature also optimises heating stop when switch-
ing from comfort temperature to economy temperature.
Installation Guide
to confirm and end
to end
)
13