Replacing The License Plate Light Bulb; Troubleshooting - Yamaha TRACER MTT9K 2019 Owner's Manual

Periodic maintenance and adjustment
Replacing the license plate
light bulb
1. Remove the license plate light unit
by removing the nuts and collars,
and then remove the license plate
light bulb socket (together with the
bulb) by pulling it out.
3
3
7
1. License plate light unit
2. Collar
3. Nut
4. License plate light bulb socket
2. Remove the burnt-out bulb by
pulling it out.
EAU58010
1. License plate light bulb
2
3. Insert a new bulb into the socket.
4. Install the socket (together with
1
4
the bulb) by pushing it in, and then
install the license plate light unit by
installing the collars and nuts.
2

Troubleshooting

Although Yamaha motorcycles receive
a thorough inspection before shipment
1
from the factory, trouble may occur
during operation. Any problem in the
fuel, compression, or ignition systems,
for example, can cause poor starting
and loss of power.
The following troubleshooting charts
represent quick and easy procedures
for checking these vital systems your-
self. However, should your motorcycle
require any repair, take it to a Yamaha
dealer, whose skilled technicians have
the necessary tools, experience, and
know-how to service the motorcycle
properly.
Use only genuine Yamaha replace-
ment parts. Imitation parts may look
like Yamaha parts, but they are often
inferior, have a shorter service life and
can lead to expensive repair bills.
When checking the fuel system, do
not smoke, and make sure there are
no open flames or sparks in the ar-
ea, including pilot lights from water
7-35
WARNING
EAU25872
EWA15142