PERIODIC MAINTENANCE AND ADJUSTMENT
6. Install the turn signal light unit by
installing the screw. NOTICE: Do
not overtighten the screw, oth-
erwise the lens may break.
[ECA11192]
7
Replacing the license plate
light bulb
1. Remove the license plate light unit
by removing the nuts and collars,
and then remove the license plate
light bulb socket (together with the
bulb) by pulling it out.
3
4
3
1. License plate light unit
2. Collar
3. Nut
4. License plate light bulb socket
2. Remove the burnt-out bulb by
pulling it out.
7-37
EAU58010
1. License plate light bulb
2
3. Insert a new bulb into the socket.
4. Install the socket (together with
1
the bulb) by pushing it in, and then
install the license plate light unit by
installing the collars and nuts.
2
1