Yamaha TRACER MTT9K 2019 Owner's Manual page 93

9
8
10
7
6
5
1. Parking lighting fuse
2. Headlight fuse
3. Plug +12V fuse (DC connector, option)
4. Plug +12V fuse (DC jack)
5. Signaling system fuse
6. Fog lamp fuse (option)
7. ABS control unit fuse
8. Seat heater fuse (option)
9. Ignition fuse
10.Spare fuse
If a fuse is blown, replace it as follows.
1. Turn the key to "OFF" and turn off
the electrical circuit in question.
2. Remove the blown fuse, and then
install a new fuse of the specified
amperage. WARNING! Do not
use a fuse of a higher amperage
rating than recommended to
Periodic maintenance and adjustment
avoid causing extensive dam-
age to the electrical system and
possibly a fire.
1
Specified fuses:
2
Main fuse:
3
50.0 A
4
Fuel injection system fuse:
10
20.0 A
Specified fuses (fuse box 1):
Radiator fan motor fuse:
15.0 A
ABS motor fuse:
30.0 A
ABS solenoid fuse:
15.0 A
Backup fuse:
7.5 A
Electronic throttle valve fuse:
7.5 A
[EWA15132]
3. Turn the key to "ON" and turn on
4. If the fuse immediately blows
7-32
Specified fuses (fuse box 2):
Fog lamp fuse:
2.0 A
Signaling system fuse:
7.5 A
Ignition fuse:
15.0 A
ABS control unit fuse:
7.5 A
Seat heater fuse:
7.5 A
Specified fuses (fuse box 3):
Headlight fuse:
7.5 A
Parking lighting fuse:
10.0 A
Plug +12V fuse:
2.0 A
Plug +12V fuse:
2.0 A
the electrical circuit in question to
check if the device operates.
again, have a Yamaha dealer
check the electrical system.
7