Replacing the license plate
light bulb
1. Remove the license plate light unit
by removing the nuts, washers
and collars, and then remove the
license plate light bulb socket (to-
gether with the bulb) by pulling it
out.
4
3
5
4
3
1. License plate light unit
2. Collar
3. Washer
4. Nut
5. License plate light bulb socket
2. Remove the burnt-out bulb by
pulling it out.
EAU59890
1. License plate light bulb
2
3. Insert a new bulb into the socket.
4. Install the socket (together with
1
the bulb) by pushing it in, and then
install the license plate light unit by
installing the collars, washers and
2
nuts.
Periodic maintenance and adjustment
1
7-38
Supporting the motorcycle
1
1. Maintenance stand (example)
Since this model is not equipped with a
centerstand, use maintenance stands
when removing the front or rear wheel
or when performing other maintenance
that requires the motorcycle to stand
up right.
Check that the motorcycle is in a stable
and level position before starting any
maintenance.
EAU67131
7