Yamaha TRACER MTT9K 2019 Owner's Manual page 27

Coolant temperature
C.TEMP
Lo
This shows the temperature of the
coolant. The coolant temperature var-
ies with changes in the weather and
engine load.
If the message "Hi" flashes, stop the
vehicle then stop the engine and let it
cool. (See page 7-38.)
GEAR
4
C.TEMP ˚F
Hi
TIP
The selected information display can-
not be switched while the message
"Hi" is flashing.
NOTICE
˚F Do not continue to operate the en-
gine if it is overheating.
Average fuel consumption
FUEL AVG
This function calculates the average
fuel consumption (fuel economy) of the
vehicle since it was last reset. The av-
erage fuel consumption display can be
set to "km/L" or "L/100km"; or when
miles is selected "MPG" will be dis-
played.
 The "km/L" display shows the av-
erage distance that can be trav-
eled on 1.0 L of fuel.
 The "L/100km" display shows the
average amount of fuel necessary
to travel 100 km.
 The "MPG" display shows the av-
erage distance that can be trav-
eled on 1.0 US gal of fuel.
Instrument and control functions
To reset the average fuel consumption
ECA10022
display, use the select switch to select
the information display that contains
the average fuel consumption display.
Push the "RESET" button briefly so
that the average fuel consumption dis-
play flashes, and then push the "RE-
SET" button again for 2 seconds while
MPG
7.6
the display is flashing.
TIP
After resetting the average fuel con-
sumption display, "_ _._" will be shown
until the vehicle has traveled 1 km (0.6
mi).
NOTICE
If there is a malfunction, "– –.–" will
be continuously displayed. Have a
Yamaha dealer check the vehicle.
Instantaneous fuel consumption
4-9
ECA15474
CRNT FUEL MPG
7.6
4