Operation And Important Riding Points; Starting The Engine - Yamaha TRACER MTT9K 2019 Owner's Manual

Operation and important riding points

Read the Owner's Manual carefully to
become familiar with all controls. If
there is a control or function you do not
understand, ask your Yamaha dealer.
WARNING
Failure to familiarize yourself with
the controls can lead to loss of con-
trol, which could cause an accident
or injury.
6
EAU15952
TIP
This model is equipped with:
 a lean angle sensor. This sensor
stops the engine in case of a vehi-
EWA10272
cle turnover. If this happens, the
engine trouble warning light will
come on, but this is not a malfunc-
tion. Turn the vehicle power off
and then back on again to cancel
the warning light. Failing to do so
will prevent the engine from start-
ing even though the engine will
crank when pushing the start
switch.
 an engine auto-stop system. The
engine stops automatically if left
idling for 20 minutes. If the engine
stops, simply push the start
switch to restart the engine.
EAUM3632

Starting the engine

Under normal conditions, shift the
transmission into neutral before start-
ing the engine. To start the engine with
the transmission in gear, the sidestand
must be up and the clutch lever pulled.
To start the engine
1. Turn the main switch to "ON", and
2. Confirm the following lights per-
TIP
 The ABS warning light should go
 The neutral position indicator light
6-1
set the engine stop switch to "
form a circuit check.
 Oil level warning light
 Engine trouble warning light
 ABS warning light
 Traction control system indi-
cator light
off after reaching a speed of 10
km/h (6 mi/h) or higher.
should be on when the transmis-
sion is in neutral.
EAU84070
".