LifeSpan Contour Folding Wooden Pilates Reformer Bed Set User Manual page 9

ASSEMBLE THE CARRIAGE STOPPER

1. Insert the Carriage stopper on the inside of the reformer frame. You can chose from the slots there

based off your height. Taller users may need to bring the stopper further away from the foot bar and gear

section.

ASSEMBLE THE HANDLES AND SHOULDER REST BLOCKS

FIG 1

Handles

1. Unscrew the pre-installed bolt on the Handle. Line up the hole on the frame to the Handle and tighten

underneath with the bolt. Repeat for the other side (Fig. 1).

Shoulder Rest

1. Remove the screw and washer from the Shoulder rest block and secure to the carriage. Tighten the

screws underneath and repeat for the other side (Fig. 1).

ASSEMBLY INSTRUCTIONS |

Table of Contents