Advertisement
ASSEMBLE THE RISERS AND ROPES
FIG 1
FIG 2
1. Unscrew the 2x knobs at the bottom of the Riser. Once the knobs are removed, place the Riser on the
frame (next to wheels) and align the holes. Re-tighten with the same knob screws. Repeat for the other
side (Fig. 2).
2. You can adjust the pulley height by unscrewing the knob at the back, sliding to preferred position and
re-tighten knob. Make sure they are even on both sides.
10
| ASSEMBLY INSTRUCTIONS
Advertisement
