Kalfire Connected App; Main Switch - Kalfire E one User Manual

If only the ember bed is activated, you can turn
on the fireplace by briefly pressing the on/off
button.
Full shutdown
Press the on/off button for approximately 3
seconds to completely turn off the fireplace. It
takes about 30 seconds.
5.4

Kalfire Connected App

The Kalfire Connected app offers more and
extended possibilities compared to the remote
control.
5.4.1 Installing the Kalfire Connected App
Before installing the Kalfire Connected app,
please check:
 If you are on the same Wi-Fi network as the
fireplace (The app should be connected to
the fireplace via a 2.4GHz Wi-Fi network).
 If your Bluetooth is turned on.
 Download the Kalfire Connected app from
the Apple App Store or the Google Play
Store. Search for: Kalfire Connected App.
 Install the app
 Download the app and follow the on-screen
instructions
 Create an account
Creating an account grants access to all
functionalities of the fireplace that can be
controlled through the KalfireConnected app.
Once the one-time registration steps are
completed, the KalfireConnected App can be
used.
5.4.2 Additional features compared to the
remote control
Dynamic Ember Bed
First, set the desired intensity of the ember bed
using the Hybrid LED function (No. 1), and add
a flicker effect to it with this function, even
when the flames are turned off.
Moods
Through the app, a combination of preferred
settings can be customized and programmed
to personal taste. There are 10 Moods available
for this purpose. Each mood can have its own
name and color assigned.
The three pre-programmed moods by Kalfire
can be overwritten or moved to a different
position. Place your most favorite Mood at 1!
Afterward, a single press of the button on the
remote control or app is sufficient to activate
the desired mood.
5.5

Main switch

Power to the fireplace can be switched off
using the power switch (0 = off /I = on) on the
front. The switch is located at the top right of
the unit, behind the metal flap (see figure), and
can be accessed by lifting up the flap.
Note that if the unit is completely
disconnected from the mains, the unit will reset
to the factory settings.