Kalfire E one User Manual page 38

Atmos Lighting (No. 9)
Atmos Lighting projects light and shadow
effects onto the logs from the ceiling of the
fireplace. This allows the logs in the fireplace to
be highlighted to a greater or lesser extent.
The light intensity is adjustable from level 1 to
level 5. With each press of the button, a higher
level is activated. After reaching level 5, the
cycle restarts with level 0. At level 0, Atmos
Lighting is turned off.
Combine this function with Dynamic Atmos
Lighting (No. 10)."
Dynamic Atmos Lighting (No. 10)
With the help of this function, a flicker effect is
added to the Atmos Lighting (No. 9).
Therefore, first choose the desired light
intensity using button 9 and activate or
deactivate the flicker effect using this function.
Adjust flame type (No. 13)
Choose one of the three different flame
images: dynamic wood fire (A), gas fire with
bright, light flame color (B), or gas fire with
warm, dark flame color (C). With each press of
the button, the next flame image is activated.
After flame image C, the cycle restarts with
flame image A
Increase flame height (No. 2)
Decrease flame height (No. 12)
Adjustable Flame Height (No. 2 and No. 12)
For flame images B and C (No. 13), the flame
height is adjustable from level 1 to level 5, and
level 6 is the shuffle mode. Increase the flame
height using button 2. Prefer lower flames? Use
button 12. For flame image A, the flame height
cannot be adjusted.
In the shuffle mode (level 6), dynamic flames
are displayed. The shuffle symbol is projected
onto the screen in the fireplace.
Shuffle symbol
Fire Intensity (No. 4)
With the Fire Intensity function, you can adjust
the intensity of the flames. The intensity is
adjustable from level 1 to level 5. With each
press of the button, the flames become more
intense. After reaching level 5, the cycle
restarts with level 1.
Kalfire Sound (No. 14)
Choose between the sound of crackling
pinewood (Pinewood sound) or the more
tranquil beechwood (Beechwood sound). With
each press of the button, alternately select
Sound A or B. Use buttons 3 and 11 to adjust
the volume louder or softer.