Kalfire E one User Manual page 39

Raise volume of Kalfire Sound (No.11)
Lower volume of Kalfire Sound (No. 3)
The volume of both Sound A and Sound B (No.
14) is adjustable from level 1 to level 5. With
each press of the button, the volume increases
(No. 11) or decreases (No. 3). At level 0, Kalfire
Sound is turned off.
Atmos Heating (No. 5)
The specially developed Atmos Heating
element provides a pleasant atmospheric
warmth that enhances the overall fire
experience. Adjustable in two settings.
Optionally available.
Moods
The flame image and heat output (when opting
for the Atmos Heating option) of the Kalfire E-
one can be tailored to your individual needs,
preferences, and circumstances. Kalfire has
pre-set and recorded 3 Moods under the
respective Mood buttons.
You activate the corresponding moods by
pressing the button for the respective Mood.
Functie
Mood 1
Atmos_heating
On – 1
Atmos_lighting
3
Dynamische
On
Atmos lighting
Hybride-LED
2
(ember bed)
Dynamisch
On
gloedbed
Flame image
A
Flame height
1
Fire intensity
1
Sound
A
Sound volume
3
Anti-Reflect function (No. 8 en No. 9)
and
The anti-reflect function provides an attractive
view of the logs and hearth when the fire is not
burning.
To switch to this mode directly from a burning
fire, briefly press the on/off button and wait
until the fire is out. You can ignore any
message displayed. Use the Atmos Lighting +
and - buttons to adjust the light intensity.
To activate the anti-reflect function when the
fire is off, press and hold the on/off button for
3 seconds, then use the Atmos Lighting + and
- buttons to adjust the light intensity.
Atmospheric Ember Bed (No. 1)
If the fireplace is completely turned off, the
ember bed can be activated separately.
With the Hybrid-LED Intensity button (No. 1),
you can turn on the ember bed and adjust the
intensity. No flames are visible.
Mood 2 Mood 3
Off Off
2 4
Off Off
2 4
Off Off
C B
2 4
2 4
Off B
Off 5