Broadcom 96 Series User Manual page 36

Broadcom 96xx User Guide
Figure 8: Card Layout for the MegaRAID 9660-16i Tri-Mode Storage Adapter
LED6
The following table describes the headers and connectors on the adapter.
Table 25: Headers and Connectors
Connector
J2 Standard edge card connector
J4 Default SBR header
J7 Advanced software options hardware
key header
J8 Onboard serial UART connector
J10 Global HDD activity LED header
Broadcom
LED5
LED3
LED2
J7
J14
Type
The interface between the storage adapter and the host system.
With the PCIe interface, this connector provides power to the board and an
I
Interface (IPMI).
2-pin connector. Reserved for Broadcom use.
2-pin connector.
Enables support for selected advanced features.
4-pin connector. Reserved for Broadcom use.
2-pin connector.
Connects to an LED that indicates activity on the drives connected to the adapter.
®
Broadcom 96xx PCIe 4.0, 24G SAS MegaRAID
J10
J4 J8
J2
2
C interface connected to the I
™
and eHBA Tri-Mode Storage Adapters
J11
Description
2
C bus for the Intelligent Platform Management
J17
J18
96xx-MR-HBA-Tri-Mode-UG108
36