Setup Of The V-2924A Modem - Valcom V-2926 User Manual

Talkback intercom system option board

Hide thumbs Also See for V-2926:

Table of Contents

SETUP OF THE V-2924A MODEM

To transfer data from a PC through a modem to the V-2924A System, the Remote Modem must be setup. THIS

IS A "ONE-TIME" PROCEDURE THAT SHOULD BE PERFORMED WHEN THE MODEM IS

INSTALLED. Select Communications Setup from the File Menu as shown in the following screen display:

Select Remote Modem Setup and the following screen is displayed:

If Yes is selected, the dip switches at the back of the modem must be set to the positions shown below. Press

OK to continue.

The following screen is displayed after selecting No from the question of using a US Robotics modem, or after

selecting Yes, setting the dip switches and pressing OK.

V-2924A

947213

Table of Contents

Do you have a question about the V-2926 and is the answer not in the manual?