Advertisement
Quick Links
White Dual Monitor Desk Stand
Instruction Manual
SKU: STAND-V002LW
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
https://vivo-us.com/products/stand-v002l
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
help@vivo-us.com
www.vivo-us.com
Chat live with an agent!
309-278-5303
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Vivo STAND-V002LW
Summary of Contents for Vivo STAND-V002LW
- Page 1 White Dual Monitor Desk Stand Instruction Manual SKU: STAND-V002LW Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/stand-v002l GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST help@vivo-us.com www.vivo-us.com...
-
Page 2: Package Contents
WARNING! If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. -
Page 3: Tools Needed
TOOLS NEEDED 22 lbs DO NOT EXCEED WEIGHT CAPACITY. Per Arm Failure to do so may result in serious injury. (10 kg) Phillips Screwdriver ASSEMBLY STEPS STEP 1 Insert pole cap (F). STEP 2 Use allen wrench (L) on bolt (J) to secure the bottom pole (D) to the base (C). - Page 4 STEP 3 Slide the cable management clip (H) down the pole followed by a single clamp (B). Choose your desired height and secure the clamp to the pole with allen wrench (M). STEP 4 Screw the pole connector (G) to the threads on top of pole (D) then add pole (E). Use allen wrench (K) to tighten down the two screws inside the pole connector.
- Page 5 STEP 5 Add the second cable management clip (H) and single clamp (B) to desired height and secure to the pole with allen wrench (M). STEP 6 OPTION A: Flat Back Monitor Secure VESA plate (A) to the back of your monitor. Layer VESA plate on top of washer (M-E), then insert correct size bolt to fit the holes in your monitor.
- Page 6 STEP 6 (Continued) OPTION B: Curved Back Monitor Secure VESA plate (A) to the back of your monitor. Layer spacers (M-F), VESA plate, washers (M-E), then insert correct size bolt to fit the holes in your monitor. M- E M- B M- D M- F STEP 7...
- Page 7 STEP 8 Adjust tilt angle with allen wrench (M). STEP 9 Route wires through the cable management clips. Place allen wrenches into the cable management clips for easy accessibility.
- Page 8 : 1HR 8M (within office hrs) - 23% within < 15m - 38% within < 30m - 61% within < 1hr - 83% within < 2hr - 92% within < 3hr FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com...
Need help?
Do you have a question about the STAND-V002LW and is the answer not in the manual?
Questions and answers