Product Specification - MSA V-TEC PFL User Instructions

3 Product Specification

Inspection/Removing Product From Service
PFLs that have arrested a fall or are unable to pass an inspection shall be
l
tagged "UNUSABLE" and disposed of in accordance with local regulations.
Due to the nature of some fall arrest events, it is possible for the energy
l
absorber to not deploy. In the event that a PFL is subjected to fall arrest
forces and the energy absorber does not deploy, the PFL still must be
removed from service and marked as "UNUSABLE" until it has been
destroyed.
If the load indicator is deployed, immediately remove the PFL from service
l
and mark it as "UNUSABLE" until it has been destroyed.
Failure to follow these warnings can result in serious personal injury or
death.
3 Product Specification
System Requirements
Component
Anchorage
Connector Standard
Harness Standard
Connectors
Standard
Retractable Type
Fall Arresters
Structure Strength
Energy Absorber
NOTE: The product may comply with standards shown. See product label for
specific compliance information. Those designated with a certification mark are
listed with the corresponding agency as compliant to the applicable standard.
8
ABNT
NBR 16325:2014
NBR 15836:2020
NBR 15837:2020
NBR 14628:2020
12 kN
NBR 14629:2020
V-TEC® PFL
IRAM
IRAM 3605
IRAM 3605
IRAM 3605
IRAM 3605
12 kN
IRAM 3605
US