CrimeStopper The Informer II CS-2016FM Operation Instructions Manual page 20

SETTING THE CLOCK (2-WAY- LCD REMOTE)
1. Press and hold all 4 buttons of remote control for approximately 3 seconds until remote beeps.
2. The minute display will begin flashing. Use the lock and unlock button to change the minute up or down
to the correct time and then press button #3 (Trunk) to set the minute value.
3. The hour display should begin flashing. Use the lock and unlock button to change the hour up or down
to the correct am or pm hour.
4. Once the correct time is displayed, wait 6 seconds, the remote will beep twice and the time of day is set.
20