Table of Contents
Advertisement
Truss Bridge Assembly
Maximizing the overall height of the bridge
I
f you operate scale rolling stock and need the maximum amount of clearance under the
bridge use both the FasTrack elevated trestle pier and the tubular track elevated trestle pier
to achieve an overall height of 6.9", enough space to clear Husky stack cars and auto carriers
with ease.
FasTrack elevated tres-
tle section
Tubular track elevated
trestle section
Bridge mounting
Figure 7. Stacking the piers for maximum height for clearance while using scale rolling stock
Combining two or more bridges
T
he pier system has been designed to allow you to connect multiple bridges to increase the
length of the span the bridge crosses. By combining two 6-82110 FasTrack Extended Truss
Bridges you will have a total of 4 pieces of each bridge pier. One set of piers will not be used
when combining two bridges, two piers will not be used when combining three bridges and so
on. Construct the bridge end piers as described previously. For the center pier use both bridge
mating top pier halves to place on top of the pier.
Bridge
Figure 8. 2 bridge mating top halves combined for two bridge use
Pier base
2 bridge pier halves
8
Track mounting
Bridge
Advertisement
Table of Contents
