Plug-n-Play track pack basics Connecting your track pack to FasTrack asTrack track and Plug-n-Play sections join together easily. With interlocking roadbed sections and large rail tabs, the track fits together securely so you always have good electrical contact. Take a look at Figure 1 to see how to join the track sections. 1.
When power is applied to your track the LED will turn ON. When power is removed or not present, the LED will turn OFF. This LED is designed to last the life of your lock-on. Should the LED need to be replaced, contact Lionel Service. LED power indicator Lock-on 10"...
Make sure that you White wire are also inserting the connectors with (Trigger/ Insulated Rail) the proper orientation. Lionel's Limited CENTER RAIL Red wire OUTSIDE RAIL Warranty does NOT cover this type of (Power) Underside of Track damage to your products.
Doing so will damage the pins on the accessory and/or the lock-on. Make sure that you are also inserting the connectors with the proper orienta- tion. Lionel's Limited Warranty does NOT cover this type of damage to your products. Note! Please be aware that adding additional accessories will take power away from the track, thus resulting in less available power for running trains.
Page 7
Wiring options Connecting an Animated Accessory continued As the Automatic Gateman is connected to the lock-on, power is supplied through the track to the accessory and the light is ON. Automatic Gateman Accessory 3-pin male connector Lock-on 5" track 5" track with break FasTrack FasTrack...
Wiring options Connecting Crossing Flashers ee figures 5-6 for more examples of animated accessory connections with your Plug-n-Play Accessory Activator Track Pack. Refer to page 5 for track connection instructions. The following scenario, figure 5 (pages 8-9), explains wiring for traditionally wired Crossing Flashers.
Page 9
Doing so will damage the pins on the accessory and/or the lock-on. Make sure that you are also inserting the connectors with the proper orienta- tion. Lionel's Limited Warranty does NOT cover this type of damage to your products.
Wiring options Connecting Crossing Flashers continued Please be aware that adding additional accessories will take power away from the track, Note! thus resulting in less available power for running trains. If your power supply shorts out (turns off) when using this cable it is most likely caused by overdrawing the available power the transformer can provide.
Page 11
Doing so will damage the pins on the accessory and/or the lock-on. Make sure that you are also inserting the connectors with the proper orienta- tion. Lionel's Limited Warranty does NOT cover this type of damage to your products. Note! Please be aware that adding additional accessories will take power away from the track, thus resulting in less available power for running trains.
(or copy) from an Authorized Lionel Retailer*, will at the discretion of Lionel LLC, be repaired or replaced, without charge for parts or labor. In the event the defective product cannot be repaired, and a suitable replacement is not available, Lionel will offer to replace the product with a comparable model (determined by Lionel LLC), if available.
Need help?
Do you have a question about the 78-1317-250 and is the answer not in the manual?
Questions and answers