Installing The Lift Bridge - Lionel 213 Owner's Manual

Installing the Lift Bridge

Y our Lift Bridge was designed for use with O gauge track. As illustrated in Figure 1, join the
track sections together by inserting the track section rail pins into the openings at the end
of the tower section rails. For good electrical contact, pins must be completely inserted so that
the track joints are tightly fitted together. Secure the Bridge to your layout by driving screws
through the openings in the base before you proceed. Refer to Figure 1.
Secure the Bridge to your layout here
(both towers).
Figure 1. Track attachment
Secure the Bridge to your layout here
(both towers).
3