Lionel 71-4094-250 Owner's Manual

Double signal bridge

Hide thumbs

Table Of Contents

71-4094-250

6/03

Lionel

Double Signal Bridge

Owner's Manual

Table of Contents

Need help?

Do you have a question about the 71-4094-250 and is the answer not in the manual?

Questions and answers

Summary of Contents for Lionel 71-4094-250

Page 1 71-4094-250 6/03 Lionel Double Signal Bridge Owner’s Manual...
Page 2 Installing the Double Signal Bridge with your 153C Contactor(s) Wiring your accessory with the 153IR Controller Replacing the lamps on your Double Signal Bridge Limited Warranty/Lionel Service The following Lionel marks may be used throughout this instruction manual and are protected under law. All rights reserved. Lionel ®...
Page 3 Positioning the Signals he Signal Bridge features two red and both signals should face “south.” If one of green signals that can face in either the tracks is “southbound,” the signal over it direction and be mounted in several posi- should face “north.”...
Page 4 Wiring the Double Signal Bridge with one 153C Contactor s illustrated in Figure 2, wire the Signal Bottom View of Signal Bridge Bridge with only one 153C Contactor, and an approaching train will cause both signals to change. Your Signal Bridge will operate best at 12-18 volts.
Page 5 Installing the Double Signal Bridge with your 153C Contactor(s) Be sure that the track is not fastened too tightly to your layout. The track must be able to Note! bend under the weight of the train. 1. Slide the 153C Contactor(s) under one of the ties in your track. The track tie will rest on the pressure plate.
Page 6 Wiring your accessory with the 153IR Controller ou may choose to purchase a 153IR Controller. Replace the 153C Contactors with Controller (available separately, 6-14111) the 153IR Controllers. The #1 terminal on to operate your Double Signal Bridge. Passing the 153C Contactor corresponds with the NC trains trigger infrared sensors on the 153IR terminal on the 153IR Controller.
Page 7 Replacing the lamps on your Double Signal Bridge uring the course of normal operations, the lamps on this accessory may require replace- ment. Lamps are available from your authorized Lionel Service Center. Follow these steps and refer to Figure 7 to replace the lamps.
Page 8 Lionel product, including all to the nearest Authorized Lionel Service Center. mechanical and electrical components, Your nearest Lionel Service Center can be found by moving parts, motors and structural calling 1-800-4-Lionel, or by accessing our Website components, except for light bulbs, is warranted to at www.lionel.com.

Lionel 71-4094-250 Owner's Manual

Table of Contents

Need help?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Lionel 71-4094-250

Summary of Contents for Lionel 71-4094-250

Table of Contents