Table of Contents
Advertisement
Truss Bridge Assembly
Compatibility with FasTrack elevated trestles
T
o make the bridge compatible with FasTrack elevated trestles (available separately,
6-12038) stack the bridge piers as follows:
1. Track mounting top pier half (top)
2. Bridge mounting top pier half (top)
3. FasTrack elevated trestle section (middle)
4. Pier Base (on bottom)
3.
4.
Figure 5. Stacking the piers for use with FasTrack trestles
Repeat this pier stack to create two piers of equal height. The mating surface on the bridge pier
has been designed to accommodate straight and curved track. Simply snap any section of
FasTrack into the track mounting top pier half.
Track mounting top
pier half
1.
Figure 6. Adding FasTrack to the bridge
2.
Elevated Trestle
(available separately, 6-12038)
1.
FasTrack track
7
FasTrack trestle
(available separately,
6-12038)
Advertisement
Table of Contents
