Dynacord V Series Installation Manual page 19

V Series
III
Figure 4.7: Tabletop use - under the table
For tabletop mounting:
1.
2.
3.
Dynacord
Stick the supplied rubber feet in the corners of the device bottom surface for more
stability with this type of installation (F).
For the correct position, refer to the Quick installation guide of the product.
Align the short rack ears with the side screws of the amplifier (C). Unscrew the existent
screws, attach the rack ear and screw them back in (1).
Secure the device by screwing the rack ears to the table as shown in the illustration
(2).
F
C
x2 2
Installation manual
General installation procedures | en
1
2024.01 | V03 | F.01U.402.248
19