Dynacord V Series Installation Manual page 18

18 en | General installation procedures
Figure 4.6: Side-by-side mounting in a 19"-rack
Tabletop use (over and under the table)
You can use this device outside a 19"‑rack on a tabletop, mounted over or under the table.
For under the table mounting:
1.
2.
3.
2024.01 | V03 | F.01U.402.248
Stick the supplied rubber feet in the corners of the device top surface for more stability
with this type of installation (F).
Place the rubber feet in the edges of the lid so that they are not on top of the labels.
For the correct position, refer to the Quick installation guide of the product.
Align the short rack ears with the side screws of the amplifier (C). Unscrew the existent
screws, attach the rack ear and screw them back in (1).
Secure the device by screwing the rack ears to the table as shown in the illustration
(2).
Installation manual
V Series
Dynacord