Dynacord V Series Installation Manual page 15

V Series
V600:2
The V600:2 amplifier has four mounting options.
Stand-alone mounting in a 19"-rack
Despite being half the size of the V600:4, the V600:2 power amplifier can be fitted alone in a
standard 19"-rack.
Mount one short rack ear to the preferred side of the amplifier using the built-in screws.
Unscrew the existent screws, attach the rack ear and screw them back in.
Mount the long rack ear (B) on the opposite side by unscrewing the existent screws on the
side of the amplifier, attaching the long ear and screwing them back in (1).
Attach the power amp with its frontal rack mount ears (short and long) (C) using four
screws and washers (2) as shown in the illustration.
I
Figure 4.3: Stand-alone mounting in a 19"-rack
Dynacord
1
B
Installation manual
General installation procedures | en
C
x2 2
2024.01 | V03 | F.01U.402.248
15