Harwin Z80-255 Instruction Sheet page 7

IS-46
Instruction Sheet for Z80-255 Hand Crimp Tool
Acceptable
Defects
Issue: 3 Date: 01/02/2023 C/Order: 32102
Insulation in-line with end of crimp area.

 Conductor in-line with end of crimp area.
Insulation butted up to but not

entering bellmouth.
Conductor in-line with contact stop

ear, but not past.
 Insulation crimp incorrectly formed.
 Conductor trapped in Insulation crimp.
 Conductor outside of crimp area.
7