Advertisement
Quick Links
This Hand Crimp Tool has been designed for use with the following Crimp Contacts:
Datamate Signal Crimp Sockets (when used with Positioner T5747):
M80-01100XX .................. Large bore Female crimp contact for 22 AWG wire
M80-01300XX .................. Small bore Female crimp contact for 24-28 AWG wire
M80-01900XX .................. Extra small bore female crimp for 28-32 AWG wire
M83-01100XX...................Large bore Female crimp contact for 22 AWG wire
M83-01300XX..................Small bore Female crimp contact for 24-28 AWG wire
Datamate Signal Crimp Pins (when used with Positioner T5747):
M80-04000XX ................. Large bore Male crimp contact for 22 AWG wire
M80-04100XX .................. Small bore Male crimp contact for 24-28 AWG wire
Datamate Signal Crimp Pins (when used with Positioner Z80-193):
M80-19400XX .................. Large bore Male crimp contact for 22 AWG wire
M80-19500XX .................. Small bore Male crimp contact for 24-28 AWG wire
Datamate T-Contact Crimp Contact (when used with Positioner Z80-444):
M80-20600XX ................. 6 Finger Datamate Contact for 22 AWG
Harwin North America
T: +1 603 893 5376
E: mis@harwin.com W: www.harwin.com
IS-01
Issue: 9
Date: 27.04.2022
HAND CRIMP TOOL M22520/2-01
Tool in open
position
(used in all L-Tek, J-Tek and Mix-Tek female crimp connectors).
(used in all L-Tek, J-Tek and Mix-Tek female crimp connectors).
(used in all L-Tek, J-Tek and Mix-Tek female crimp connectors).
(used in all L-Tek, J-Tek and Mix-Tek female crimp connectors).
(used in all L-Tek, J-Tek and Mix-Tek female crimp connectors).
(used in L-Tek male crimp connectors).
(used in L-Tek male crimp connectors).
(used in J-Tek and Mix-Tek male crimp connectors).
(used in J-Tek and Mix-Tek male crimp connectors).
E: mis@harwin.co.uk W: www.harwin.com
C/Order: 31490
Selector knob
Safety clip
Positioner
guide
Harwin Europe
T: +44 (0) 23 9231 4545
Harwin Asia
T: +65 6 779 4909
E: mis@harwinasia.com W: www.harwin.com
Page 1 of 4
Advertisement
Related Manuals for Harwin M22520/2-01
Summary of Contents for Harwin M22520/2-01
- Page 1 HAND CRIMP TOOL M22520/2-01 Tool in open Selector knob position Safety clip Positioner guide This Hand Crimp Tool has been designed for use with the following Crimp Contacts: Datamate Signal Crimp Sockets (when used with Positioner T5747): M80-01100XX ....Large bore Female crimp contact for 22 AWG wire (used in all L-Tek, J-Tek and Mix-Tek female crimp connectors).
- Page 2 M300-1020045 ....Power Male crimp contact for 22 AWG GENERAL INFORMATION The hand crimp tool M22520/2-01 consists of a basic hand tool, which should be used with a positioner. The contact is correctly crimped when the tool is free to open at the fully closed position, i.e., when the ratchet releases.
- Page 3 Harwin North America Harwin Europe Harwin Asia T: +1 603 893 5376 T: +44 (0) 23 9231 4545 T: +65 6 779 4909 E: mis@harwin.com W: www.harwin.com E: mis@harwin.co.uk W: www.harwin.com E: mis@harwinasia.com W: www.harwin.com IS-01 Issue: 9 Date: 27.04.2022...
- Page 4 IS-40. CARE OF TOOL There is virtually no maintenance required for the M22520/2-01 tool. However, it is good practice to keep the indenter tips free of residual colour band deposits and other debris. A small wire brush may be used for this purpose.