Harwin Z80-255 Instruction Sheet page 8

IS-46
Instruction Sheet for Z80-255 Hand Crimp Tool
ASSEMBLY – CRIMP INTO HOUSING
The completed crimp can now be inserted into the appropriate M225 series crimp housing. For
larger wire sizes, no other tooling should be required for this operation; the crimps can be
pushed in by hand. Crimps are assembled into the mould with the retaining tang towards the
outer edge of the housing. With thinner wires, it may be helpful to push onto the back of the
crimp with the Extraction Tool Z80-258.
Issue: 3 Date: 01/02/2023 C/Order: 32102
Insulation not visible through

inspection window.
Conductor not visible through

inspection window.
 Insulation enters bellmouth
Conductor extends past stop ear

8