Advertisement
Quick Links
Z22-020
M22-305
24-30
M22-308
28-30
M22-308
24-26
This Hand Crimp Tool has been designed for use with the following crimp contacts:
M22-30400XX ................................. 2mm Pitch Crimp Contacts, Reeled, Gold or Tin
M22-30500XX ................................. 2mm Pitch Crimp Contacts, Loose, Gold or Tin
M22-3060046 ................................. 2mm Pitch Crimp Contacts, Reeled, Tin
M22-3080046 ................................. 2mm Pitch Crimp Contacts, Loose, Tin
Harwin North America
T: +1 603 893 5376 F: +1 603 893 5396
E: misboston@harwin.com W: www.harwin.com
IS-05
Issue: 3
Date: 03.10.07
HAND CRIMP TOOL Z22-020
T: +44 (0) 23 9231 4545 F: +44 (0) 23 9231 4590
E: mis@harwin.co.uk W: www.harwin.com
C/Note: 9874
5
Harwin Europe
Harwin Asia
T: +65 6 779 4909 F: +65 6 779 3868
E: mis@harwin.com.sg W: www.harwin.com.sg
Page 1 of 3
Advertisement
Related Manuals for Harwin Z22-020
Summary of Contents for Harwin Z22-020
- Page 1 HAND CRIMP TOOL Z22-020 Z22-020 M22-305 24-30 M22-308 28-30 M22-308 24-26 This Hand Crimp Tool has been designed for use with the following crimp contacts: M22-30400XX ......... 2mm Pitch Crimp Contacts, Reeled, Gold or Tin M22-30500XX ......... 2mm Pitch Crimp Contacts, Loose, Gold or Tin M22-3060046 .........
- Page 2 GENERAL INFORMATION The Z22-020 Hand Crimp Tool consists of a ratchet mechanism hand tool and a set of jaws. The jaws comprise of upper and lower crimp dies. The contact is correctly crimped when the tool is free to open at the fully closed position, i.e. when the ratchet releases.
- Page 3 Keeping the cable steady in the crimp, fully close the hand crimp tool until the ratchet releases. Let the crimp tool open. After crimping remove the assembly. The process is then repeated for each crimp required. TOOL MAINTENANCE Keep the tool clean and free from dirt and foreign matter. Ensure that all retaining pins and clips are in place before use, and that signs of wear are not visible.