Datascope Accutorr Plus Service Manual page 9

7.5.13 Verification of Accutorr Plus Pneumatic Performance,
Using the "Cufflink" NIBP Emulator (11d) ......... 7-11
7.5.14 Check Over Pressure Reference (12a, 12b, 12c)....... 7-12
7.5.15 Main Pressure Transducer Calibration (llc) ......... 7-12
7.5.16 Over Pressure Transducer Calibration.............. 7-13
7.5.17 Battery Selection (13).......................... 7-13
7.6 Predictive Thermometer Verification and Calibration.......... 7-14
7.6.1 Temperature Accuracy Verification with the
Predicrive Temperature Simulator ................ 7-14
7.62 Water Bath Method ........................... 7-15
7.63 System Calibration Procedure .................... 7-15
7.6.4 Temperature Verification Test, Infrared
Thermometer ................................ 7-16
7.6.5 Low Battery Sensing ........................... 7-17
7.7 Battery Test for Accutorr Plus ........................... 7-18
7.74 Low Battery Indicator.......................... 7-18
7.7.2 Set the Current Time .......................... 7-18
7.8 NIBP Normal Operation ............................... 7-19
7.9 Trend Memory Initialization ............................ 7-20
7.10 SpO2 Normal Operation (Accutorr Plus with SpO2 only). ...... 7-20
8.0 PREVENTIVE MAINTENANCE.............,......... 8-1
8.1 Introduction......................................... 8-1
8.2 Limitations of Physiological Simulators .................... 8-1
8.3 Preventive Maintenance Schedule............ l 8-2
8.3.1 Mechanical and Physical Visual Inspection
(One Year Interval)............................ 8-2
8.3.2 Electrical Safety and Performance Checks
(One Year Interval)............................ 8-2
Accutorr Plus Service Manual Revised 12/20/00 vii
Introduction