Table of Contents
Advertisement
1.3.9
DISPLAY TIME OUT MODE
To conserve power, most displays will blank at user selected times. The LCD illumination
time out can be set berween 3 and 15 minutes. The LED display time out can be set
between 5 and 60 minutes. Since the Accutorr Plus can be powered from either an AC or
DC source, the user configuration allows the setting of separate times for each type of
power source. See User Configuration, section 1.3.15 for more information on setting che
time out minutes.
To turn on the LCD light, press the MENU key (8). To turn on the LED displays, press
any key.
1-32
Accutorr Plus Service Manual
Chapter 1, Operation
Advertisement
Table of Contents
Need help?
Do you have a question about the Accutorr Plus and is the answer not in the manual?