Lighting - BMW R 1250 GS Adventure Rider's Manual

Install screws (short collar) 3
and 4.
Close lid 5 for the storage
compartment.
Install screws (short collar) 1.
Install screw 2.
Screw connection of
body
M6 x 25
8 Nm
Install the rider's seat.
( 132)

LIGHTING

Replacing LED light sources
without control for head-
light OE
WARNING
Vehicle overlooked in traffic
due to failure of the lights
on the vehicle
Safety risk
Always replace a faulty bulb
at the earliest possible op-
portunity. Consult a special-
ist workshop, preferably an
authorised BMW Motorrad
Retailer.
All light sources of the vehicle
are LED light sources. The
service life of the LED light
sources is longer than the
presumed vehicle service life.
If an LED light source is faulty
contact a specialist workshop,
preferably an authorised
BMW Motorrad retailer.
Replacing bulb for low-beam
and high-beam headlight
with control for headlight
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Switch off the ignition.
The arrangements of the
connectors and the light
sources may differ from the
following figures.
203
OE