Table of Contents
Advertisement
Apply firm pressure to hand-
brake lever 1 or to the foot-
brake lever and then quickly
release the lever.
Alternatively, apply the brake
for about one second beyond
the vehicle reaching a stand-
still on an incline of at least
3%.
shows green.
Hill Start Control Pro is activ-
ated.
To switch off Hill Start Con-
trol Pro, operate handbrake
lever 1 or the footbrake lever
again.
If Hill Start Control Pro
has been deactivated by
means of the handbrake lever,
automatic Hill Start Control is
deactivated for the next 4 m.
disappears.
Alternatively, ride off in 1st or
2nd gear.
In order for the motor-
cycle to pull away from
rest with Hill Start Control
Pro, the throttle grip has to be
turned to open the throttle for
pullaway.
disappears.
Hill Start Control Pro is deac-
tivated.
For more information on Hill
Start Control Pro see the sec-
tion headed "Engineering de-
tails" (
175).
Adjust Hill Start Control Pro
with riding modes Pro
Switch on the ignition.
(
82)
Navigate to
Vehicle settings
Select
HSC Pro
To switch off Hill Start Con-
trol Pro, select
Hill Start Control Pro is deac-
tivated.
To switch on manual Hill Start
Control Pro, select
Hill Start Control Pro can be
activated by forcefully oper-
ating the handbrake or foot-
brake lever.
To switch on automatic Hill
Start Control Pro, select
Hill Start Control Pro can be
activated by forcefully oper-
109
OE
,
Settings
.
.
.
Off
Manual
Auto
.
.
Advertisement
Chapters
Table of Contents
