BMW R 1250 GS Adventure Rider's Manual page 114

108 OPERATION
Apply firm pressure to hand-
brake lever 1 or to the foot-
brake lever and then quickly
release the lever.
shows green.
Hill Start Control is activated.
To switch off Hill Start
Control, operate handbrake
lever 1 or the footbrake lever
again.
disappears.
Alternatively, ride off in 1st or
2nd gear.
In order for the motor-
cycle to pull away from
rest with Hill Start Control, the
throttle grip has to be turned to
open the throttle for pullaway.
disappears.
Hill Start Control is deactiv-
ated.
See the "Engineering details"
section for more information
on Hill Start Control (
Operating
Hill Start Control Pro
with riding modes Pro
Requirement
Vehicle stationary and upright,
engine running.
ATTENTION
Non-availability of Hill Start
Control
Risk of accident
Apply the brakes manually
to hold the vehicle.
Hill Start Control Pro is
purely a comfort system
that facilitates hill starts and
consequently, is not to be con-
fused with a parking brake.
Hill Start Control Pro
should not be used on
gradients steeper than 40%.
175).
OE