Lighting; Trim Panel Components - BMW M 1000 RR 2021 Rider's Manual

Check whether a rivet head 1
has twisted out of line.
Rivet heads are parallel to the
chain centreline 2.
Chain riveting is OK.
If one or more rivet heads have
twisted out of line:
Consult a specialist work-
shop, preferably an authorised
BMW Motorrad retailer.

LIGHTING

Replacing LED light sources
WARNING
Vehicle overlooked in traffic
due to failure of the lights
on the vehicle
Safety risk
Always replace a faulty bulb
at the earliest possible op-
portunity. Consult a special-
ist workshop, preferably an
authorised BMW Motorrad
Retailer.
All light sources of the vehicle
are LED light sources. The
service life of the LED light
sources is longer than the
presumed vehicle service
life. If an LED light source
is faulty, please contact a
specialist workshop, preferably
an authorised BMW Motorrad
Retailer.

TRIM PANEL COMPONENTS

Remove the side panel
The procedure described
here for the right side
panel applies by analogy to the
left side as well.
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Remove screws 1 (6 mm with
collar).
Remove screws 2 (3 mm with
collar).
Remove screw 3 (9 mm with
collar).
187