Riding Mode Pro - BMW R 1250 GS Adventure Rider's Manual

with riding modes Pro
The intervention of riding
dynamics control systems
can be restricted, depending on
which riding mode is selected
and how the selected mode is
configured.
Possible restrictions are indic-
ated by a pop-up message, for
example
Warning! ABS set-
.
ting.
The ABS indicator light flashes
irregularly.
See the section entitled "En-
gineering details" for more in-
formation on riding dynamics
control systems such as ABS.
With the motorcycle at
a standstill, the selected
mode is activated after
approximately two seconds.
The following conditions must
be satisfied for activation of a
new riding mode while riding:
Throttle grip is in idle posi-
tion.
Brake is not applied.
Adaptive cruise control is not
active.
The selected riding mode
is retained with the engine-
characteristic, DTC, ABS and
MSR adaptation settings even
after the ignition has been
switched off.
OE

RIDING MODE PRO

with riding modes Pro
Adjustment option
The Pro riding modes can be
set up individually only after
being selected in riding mode
preselection.
Selecting Pro riding mode
Switch on the ignition.
(
Navigate to
Vehicle settings
ing mode preselection
Select
mode
ing mode
Call up
Setting up Enduro Pro
with riding modes Pro
Select Pro riding mode.
(
The
selected. The current setting is
displayed as a diagram 1 with
explanatory texts relating to the
system 2.
82)
Settings
ENDURO PRO riding
or
DYNAMIC PRO rid-
.
Configuration
103)
system has been
Engine
103
OE
,
,
Rid-
.
.
OE