Table of Contents
Advertisement
126
ADJUSTMENT
Clean the threads.
Install peg 2 in desired posi-
tion A or B.
Turn peg 2 to the desired po-
sition.
Install new screw 1.
Peg to footbrake lever
M6 x 20
Thread-locking compound:
micro-encapsulated
10 Nm
SHIFT MECHANISM
Adjusting gearshift lever
Slacken screw 1.
Turn peg 2 to the desired po-
sition.
A peg that has been set
too high or too low can
lead to problems when shifting
gear. Check the position of the
peg if you experience shifting
problems.
Tighten screw 1 to the spe-
cified tightening torque.
Peg (clamp) to shift
lever
M6 x 16
8 Nm
Adjusting gearshift lever peg
with Option 719 Billet Pack
Classic II
OE
or
with Option 719 Billet Pack
Storm II
OE
or
with Option 719 Billet Pack
Shadow II
OE
Foot clearance and height re-
lative to peg 2 can be adjus-
ted by turning to different po-
sitions.
Advertisement
Chapters
Table of Contents
