128
ADJUSTMENT
Install clamping block 1 in re-
quired position A or B and
tighten bolt 2.
Clamping block on
footrest hinge
M8 x 25
20 Nm
Position footrest 3 on clamp-
ing block 2.
Install screws 1.
Footrest on clamping
block
M6 x 20 / M6 x 12
10 Nm
Remove and refit the footrest
on the other side in the same
way.
HANDLEBARS
Adjustable handlebars
Have the handlebars adjusted
by a specialist workshop,
preferably an authorised
BMW Motorrad retailer.
When adjusting the
handlebars, make sure
that the mirrors do not
come into contact with the
windscreen.
If necessary, adjust the mirror
arm accordingly.
with handlebar extension
Installing handlebar risers
might restrict the free
movement of cables and lines.
If handlebar risers are installed,
BMW Motorrad recommends
setting the handlebars to the
top position (10° mark).
OE