264
SERVICE
BMW MOTORRAD RUNNING-IN CHECK
BMW Motorrad running-in check
The tasks included in the BMW Motorrad running-in check are
listed below. The actual scope of work applicable for your vehicle
may vary.
Set service date and remaining distance
Performing vehicle test with BMW Motorrad diagnostic system
Engine-oil change, with filter
Changing oil in bevel gears
Check the brake-fluid level, front wheel brake
Check the brake-fluid level, rear wheel brake
Check the coolant level
Checking tyre tread depth and tyre pressures
Check the lighting and signalling system
Checking spoke tension, adjusting if necessary
Function test, engine start suppression
Final inspection and check for road safety
Performing vehicle test with BMW Motorrad diagnostic system
Confirm the BMW service in the on-board literature