Spring Preload - BMW R 1250 GS Adventure Rider's Manual

Correctly positioning height
adjusters
Front height adjuster 1 must
always be set to the high pos-
ition (letter H).
Rear height adjuster 1 must
always be set to the low posi-
tion (letter L).
Installing Rallye seat
Engage Rallye seat 1 in
mounts 2 on left and right,
then apply pressure to the
rear of the seat to push it
forward and down until the
lock engages with an audible
click.
See the rider's manual of
the vehicle for instructions
on how to remove and install
the seats with Comfort pack-
age optional equipment.

SPRING PRELOAD

without Dynamic ESA
Adjustment
It is essential to set the spring
preload of the rear suspension
to suit the load carried by the
motorcycle. Increase the spring
preload when the vehicle is
heavily loaded and reduce the
spring preload accordingly
when the vehicle is lightly
loaded.
133
OE