BMW R 1250 GS Adventure Rider's Manual page 205

Brake caliper to tele-
scopic fork
M10 x 65
38 Nm
Remove the adhesive tape
from the wheel rim.
WARNING
Brake pads not lying against
the brake disc
Risk of accident due to
delayed braking effect.
Before driving, check that
the brakes respond without
delay.
Operate the brake several
times until the brake pads are
bedded.
Insert the cable for the wheel
speed sensor into holding
clips 1 and 2.
Insert the wheel speed sensor
into the bore hole and install
screw 3.
Wheel-speed sensor to
fork leg
M6 x 16
Joining compound: Micro-
encapsulated or medium-
strength thread-locking com-
pound
8 Nm
Removing rear wheel
Make sure the ground is level
and firm and place the motor-
cycle on its centre stand.
Engage first gear.
CAUTION
Hot exhaust system
Risk of burn injury
Do not touch a hot exhaust
system.
Allow rear silencer to cool
down.
Remove bolts 1 from the rear
wheel, while supporting the
wheel.
Roll the rear wheel out toward
the rear.
199