134
ADJUSTMENT
Adjusting spring preload for
rear wheel
WARNING
Adjusting spring preload
while riding.
Risk of accident
Do not attempt to adjust
spring preload unless the
motorcycle is at a standstill.
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
WARNING
Spring preload setting and
spring-strut damping setting
not matched.
Impaired handling.
Adjust spring-strut damping
to suit spring preload.
To increase spring preload,
turn adjuster knob 1 in the
direction indicated by the
HIGH arrow.
To reduce spring preload, turn
adjuster knob 1 in the direc-
tion indicated by the LOW
arrow.
Basic setting of spring
preload, rear
Turn the adjuster as far as it
will go in the LOW direction
(One-up riding without lug-
gage)
Turn the adjuster knob as
far as it will go in the LOW
direction, then back it off
15 turns in the HIGH direc-
tion (One-up with luggage)
Turn the adjuster knob as
far as it will go in the LOW
direction, then back it off
30 turns in the HIGH direc-
tion (Two-up with luggage)
DAMPING
without Dynamic ESA
Setting
Damping must be adapted to
suit the surface on which the
motorcycle is ridden and to suit
spring preload.
OE