Table of Contents
Advertisement
Adjusting mirror arm
4
62
Push protective cap 1 up over
z
the threaded fastener on the
mirror arm.
Slacken nut 2.
Turn the mirror arm to the ap-
propriate position.
Tighten the nut to the spe-
cified tightening torque, while
holding the mirror arm to en-
sure that it does not move out
of position.
Mirror to adapter
22 Nm
Push the protective cap over
the threaded fastener.
Handlebars
Adjusting handlebars
You can turn the handlebar
clamping blocks 180° to increase
or decrease handlebar reach.
Short-reach position, handlebars
toward rider.
Long-reach position, handlebars
away from rider.
In order to ensure that the
handlebars are set correctly, this
adjustment should be carried
out by a specialist workshop,
preferably an authorised BMW
Motorrad dealer.
Advertisement
Table of Contents
